Full technical data for every Asra Paints product — method of application, dilution ratio, drying time,
re-coat interval and coverage per litre. All figures are from the Asra Industry product catalogue.
Coverage varies with surface porosity, texture and application method; treat these as working figures
for estimation, not guarantees.
Exterior emulsion
Cotex Supersheen Dust Proof Exterior Emulsion
Acrylic co-polymer emulsion wall coating for dry and moderately humid conditions. Formulated for adhesion to cement plaster, asbestos and similar surfaces, with a wide range of non-fading shades.
| Method of application | Brush, roller or spray |
|---|
| Dilution | 200–400 ml water per litre |
|---|
| Drying time | Surface dry 60–90 min · Hard dry 24–48 hrs |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 260–300 sq.ft per litre (1 coat) · 140–160 sq.ft per litre (2 coats) |
|---|
Exterior emulsion
Cotex Exterior Emulsion
Acrylic co-polymer emulsion for exterior walls in dry or moderately humid climates. Adheres to cement plaster, asbestos, boards and RCC walls, with long-lasting shades that resist fading.
| Method of application | Brush, roller or spray |
|---|
| Dilution | 200–400 ml water per litre |
|---|
| Drying time | Surface dry 60–90 min · Hard dry 24–48 hrs |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 220–260 sq.ft per litre (1 coat) |
|---|
Interior emulsion
Neo Bharat Latex Plastic Paint
Acrylic co-polymer emulsion wall coating for dry or moderately humid interiors. Bonds to cement plaster, asbestos, boards and RCC walls with long-lasting, fade-resistant shades.
| Method of application | Brush, roller or spray |
|---|
| Dilution | 200–400 ml water per litre |
|---|
| Drying time | Surface dry 60–90 min · Hard dry 24–48 hrs |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 220–260 sq.ft per litre (1 coat) |
|---|
Primer
Cotex Exterior Wall Cement Primer
Water-based acrylic co-polymer primer for exterior walls and ceilings — sand, cement plaster, asbestos, brick, lime and P.O.P. Fast drying, with excellent hiding, holdout and spatter-less application. Also suitable for interior dry wall, plaster and masonry.
| Method of application | Brush, roller or spray |
|---|
| Dilution | As required |
|---|
| Drying time | 20 minutes |
|---|
| Coating system | 1 coat |
|---|
| Coverage | 215–270 sq.ft per litre (1 coat) · available in white |
|---|
Distemper
Asra Gold Acrylic Distemper
Premium washable water-based interior wall finish for ceilings and walls. Gives a matt finish free of the glare that comes off reflective surfaces.
| Method of application | Brush, roller |
|---|
| Dilution | 500 ml water per kg (do not dilute acrylic putty) |
|---|
| Drying time | Surface dry 3–4 hrs · Hard dry 24–28 hrs |
|---|
| Re-coat interval | 6 hours |
|---|
| Coating system | 2–3 coats |
|---|
Distemper
Impex Premium Acrylic Distemper
100% water-based acrylic co-polymer emulsion for interior walls. Available in factory-made ready shades and in a tintable format, giving an elegant, durable matt finish.
| Method of application | Brush, roller |
|---|
| Dilution | 500 ml water per kg (do not dilute acrylic putty) |
|---|
| Drying time | Surface dry 3–4 hrs · Hard dry 24–28 hrs |
|---|
| Re-coat interval | 6 hours |
|---|
| Coating system | 2–3 coats |
|---|
Enamel
Cotex Hi-Gloss Synthetic Enamel
Synthetic enamel with excellent weather resistance, formulated for a tough, fungus-free finish with high gloss and colour retention. Used on interior and exterior wood, metal and masonry; forms a hard film resistant to household stains.
| Method of application | Brush, spray |
|---|
| Dilution | 200–400 ml per litre |
|---|
| Drying time | Surface dry 60–90 min · Hard dry 24–48 hrs |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 215–270 sq.ft per litre |
|---|
Primer
Gungun Red Oxide Primer
Economical anti-corrosive primer for metal surfaces, with strong adhesion and easy-flow levelling. Free of heavy metals — no lead, mercury or chromium.
| Method of application | Brush, spray |
|---|
| Dilution | 200–400 ml per litre |
|---|
| Drying time | Surface dry 60–90 min · Hard dry 24–48 hrs |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 215–270 sq.ft per litre |
|---|
Specialty coating
No.1 Aluminium Paint
Dual-pack general purpose aluminium paint with high lustre, designed for well-prepared metal surfaces — storage tanks, roofs and pipe work. The film reflects heat and light while protecting against corrosion. Mix medium and paste thoroughly; do not thin.
| Method of application | Brush, spray |
|---|
| Dilution | Do not thin — mix medium and paste |
|---|
| Drying time | Surface dry 60–90 min |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 180–200 sq.ft per litre · 50% solids · viscosity 20–25 sec @ 30°C Ford cup |
|---|
Specialty finish
24 Carat Metallic Gold Paint
Metallic finish luxury emulsion for interior and exterior use, giving a shimmering, high-impact appearance in a single colour. Can be combined with ragging, combing and dragging techniques for textured effects.
| Method of application | Brush, roller or spray |
|---|
| Dilution | 200–400 ml water per litre |
|---|
| Drying time | Surface dry 60–90 min · Hard dry 24–48 hrs |
|---|
| Re-coat interval | 2–4 hours |
|---|
| Coating system | 2–3 coats |
|---|
| Coverage | 260–300 sq.ft per litre (1 coat) · 140–160 sq.ft per litre (2 coats) |
|---|
Texture
Cotex Wall Texture
Textured wall coating that creates a three-dimensional patterned finish on walls and ceilings. Available patterns: combing, slap brush, sand swirl, popcorn, skip trowel and knockdown. Also used to restore the appearance of walls affected by bumps, water damage or unevenness.
| Method of application | Trowel, brush, texture tools |
|---|
| Dilution | As required |
|---|
| Coating system | As required |
|---|
Grout
Cotex Epoxy Grout
Stain-free, colour-fast, chemical-resistant 100% solid epoxy grout for ceramic tile, vitrified tile, marble and stone. Suited to residential and commercial installations exposed to physical abuse, shock and chemicals. Anti-fungal and anti-bacterial; 10% stain free; for floor and wall surfaces.
| Method of application | Grout float |
|---|
| Dilution | Two-part — mix as directed |
|---|